Clamp · Reverser · Mold Carrier · Die spotting press · Mold Switch
DIE LIFTER(DL50)
TAEDO SYSTEM
Product
CUSTOMER
Please feel free to contact us if you have any questions.
TAEDO SYSTEM Co., Ltd.
TEL. +82-32-822-1921
~3
FAX. +82-32-822-1924
EMAIL. taedo684@hanmail.net
BUSAN business office
TEL. +82-51-988-1921
FAX. +82-51-988-1924
Summary
The mold can move on the rollers with a force less than about 1/100 of the mold load.
CYLINDER and CYLINDER connection is connected by O.S.T high pressure pipe.
SCRAP prevention cover is attached to ROLLER part. Therefore, SCRAP can be used safely in many places.
The level of the limiter can be adjusted with the leveling screw.
ROLLER has a protective surface with special surface treatment to protect the bearings.
Structure
-At the time of ascent, hydraulic cylinder A is operated by hydraulic pressure. (When descending, it will return to SPRING.)
-The ROLLER-3D attached to the ROLLER BAR rises about mm from the surface of the BOLSTER, and the mold rises as shown in Fig. B.
Output graph(CYLINDER OUTPUT)
Nominal method
DL50 - ① - A
① | Die Lifter Full length: L(mm) |
| L | 300~3400 |
CLINDER | |
| Interanal pressure | 375 Kgf/cm2 |
| Maximum applied pressure | 250 Kgf/cm2 |
| Pressure range | 5 ~ 60℃ |
| Oil used | General hydraulic oil(ISOVG 32-56) |
Modalities / Forms
Modalities / Dimension (L=300~3400 Common use)
| Die Lifter Full length (L) | Number of cylinders (NC) | Rollers number (NR) | Between cylinders Rollers number (NCR) | Allowable load of the minimum number of rollers subject to mold load (Kgf) | cylinder interval (PC) | All cylinder interval | Roller interval (PR) | All Roller interval (LR) | |||||||
| Roller number (NPR) | |||||||||||||||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | ||||||||
| 300 | 2 | 2 | 2 | 202 | 202 | 100 | 100 | ||||||||
| 400 | 2 | 3 | 3 | 750 | 1150 | 302 | 302 | 100 | 200 | ||||||
| 500 | 2 | 4 | 4 | 1500 | 402 | 402 | 100 | 300 | |||||||
| 600 | 2 | 5 | 5 | 500 | 600 | 850 | 155 | 502 | 502 | 100 | 400 | ||||
| 700 | 3 | 6 | 3 | 750 | 1150 | 1500 | 1900 | 2250 | 301 | 602 | 100 | 500 | |||
| 800 | 3 | 6 | 3 | 351 | 702 | 120 | 600 | ||||||||
| 900 | 3 | 8 | 4 | 2650 | 3000 | 401 | 802 | 100 | 700 | ||||||
| 1000 | 3 | 8 | 4 | 451 | 902 | 114 | 800 | ||||||||
| 1100 | 4 | 9 | 3 | 3400 | 334 | 1002 | 112.5 | 900 | |||||||
| 1200 | 4 | 9 | 3 | 367 | 1102 | 125 | 1000 | ||||||||
| 1300 | 4 | 12 | 4 | 401 | 1202 | 100 | 1100 | ||||||||
| 1400 | 4 | 12 | 4 | 434 | 1302 | 109 | 1200 | ||||||||
| 1500 | 4 | 12 | 4 | 467 | 1402 | 118 | 1300 | ||||||||
| 1600 | 5 | 12 | 3 | 375.5 | 1502 | 127 | 1400 | ||||||||
| 1700 | 5 | 16 | 4 | 400.5 | 1602 | 100 | 1500 | ||||||||
| Die Lifter Full length (L) | Number of cylinders (NC) | Rollers number (NR) | Between cylinders Rollers number (NCR) | Allowable load of the minimum number of rollers subject to mold load (Kgf) | cylinder interval | All cylinder interval | Roller interval (PR) | All Roller interval (LR) | |||||||
| Roller number (NPR) | |||||||||||||||
| 10 | 11 | 12 | 13 | 14 | 15 | 16 | - | ||||||||
| 300 | 2 | 2 | 2 | 202 | 202 | 100 | 100 | ||||||||
| 400 | 2 | 3 | 3 | 302 | 302 | 100 | 200 | ||||||||
| 500 | 2 | 4 | 4 | 402 | 402 | 100 | 300 | ||||||||
| 600 | 2 | 5 | 5 | 502 | 502 | 100 | 400 | ||||||||
| 700 | 3 | 6 | 3 | 301 | 602 | 100 | 500 | ||||||||
| 800 | 3 | 6 | 3 | 351 | 702 | 120 | 600 | ||||||||
| 900 | 3 | 8 | 4 | 401 | 802 | 100 | 700 | ||||||||
| 1000 | 3 | 8 | 4 | 451 | 902 | 114 | 800 | ||||||||
| 1100 | 4 | 9 | 3 | 334 | 1002 | 112.5 | 900 | ||||||||
| 1200 | 4 | 9 | 3 | 367 | 1102 | 125 | 1000 | ||||||||
| 1300 | 4 | 12 | 4 | 3750 | 4150 | 4500 | 401 | 1202 | 100 | 1100 | |||||
| 1400 | 4 | 12 | 4 | 434 | 1302 | 109 | 1200 | ||||||||
| 1500 | 4 | 12 | 4 | 467 | 1402 | 118 | 1300 | ||||||||
| 1600 | 5 | 12 | 3 | 375.5 | 1502 | 127 | 1400 | ||||||||
| 1700 | 5 | 16 | 4 | 4900 | 5250 | 5650 | 6000 | 400.5 | 1602 | 100 | 1500 | ||||
