Clamp · Reverser · Mold Carrier · Die spotting press · Mold Switch
TM-CLAMP
TAEDO SYSTEM
Product
CUSTOMER
Please feel free to contact us if you have any questions.
TAEDO SYSTEM Co., Ltd.
TEL. +82-32-822-1921
~3
FAX. +82-32-822-1924
EMAIL. taedo684@hanmail.net
BUSAN business office
TEL. +82-51-988-1921
FAX. +82-51-988-1924
Summary
Has strong clamping ability.
It maintains strong holding force even at zero hydraulic pressure and was developed for the use of injection molding machines.
Structure
Hydraulic Pneumatic Circuit Diagram
Modalities
Modalities / Forms | TM 1 L | TM 2.5L | TM 4L | TM 6L | TM 10L | TM 16L | |
Clamping force (TON) | Hydraulics 140 ㎏/㎠ 時 | 1 | 2.5 | 4 | 6 | 10 | 16 |
Holding power (TON) | Hydraulics 0 ㎏/㎠ 時 | 0.05 | 0.1 | 0.16 | 0.25 | 0.4 | 0.6 |
All stroke (㎜) | 3.5 | 4 | 4 | 4 | 4.5 | 4.5 | |
Clamp stroke (㎜) | 2 | 2 | 2 | 2 | 2 | 2 | |
Safety stroke (㎜) | 1.5 | 2 | 2 | 2 | 2.5 | 2.5 | |
UN CLAMP PRESSURE ( kgf/㎠ ) | 30 | 30 | 30 | 30 | 30 | 30 | |
Required flow rate | CLAMP (㎖) | 15 | 41 | 92 | 163 | 298 | 520 |
UN CLAMP (㎖) | 6 | 11 | 28 | 48 | 87 | 143 |
Measurement
Form | E | F | L | M | N | R | S | U | V | W | Z | X | H | A | B | C | D | PT |
TM-1 | 42 | 21 | 11 | 118 | 9 | 52 | 18 | 38 | 12 | 18 | 1.5 | M 8 | MIN.20 | 50 | 59 | 9 | 21.5 | 1/8 |
TM-2.5 | 56 | 30 | 16 | 145 | 12 | 78 | 27 | 58 | 17 | 22 | 2 | M 10 | MIN.30 | 50 | 78 | 15 | 10 | 1/4 |
TM-4 | 76 | 39 | 19 | 177 | 14.5 | 88 | 35 | 68 | 20 | 26 | 2 | M 12 | MIN.39 | 50 | 93.5 | 15 | 15 | 1/4 |
TM-6 | 90 | 43 | 21 | 197 | 15 | 108 | 45 | 84 | 22 | 30 | 2 | M 14 | MIN.35 | 50 | 99 | 24 | 16 | 1/4 |
TM-10 | 112 | 57 | 25 | 238.5 | 19 | 135 | 55 | 106 | 30 | 36 | 2.5 | M 18 | MIN.40 | 55 | 121 | 30.5 | 25 | 3/8 |
TM-16 | 137 | 78 | 32 | 285 | 20 | 182 | 72 | 135 | 40 | 50 | 2.5 | M 24 | MIN.40 | 62 | 156.5 | 38.5 | 77 | 3/8 |